LPG Gas Cylinder Silk Screen Printing Machine

LPG Gas Cylinder Silk   Screen Printing Machine

LPG Gasoline Cylinder Silk / Screen Printing Equipment


Primary Parameters

Printing Device Dimensions seven-hundred*600mm(L*W)
Max. Producing efficiency 2pc/min (include cylinder loading&unloading time)   
Ink consumption <2g/pcs 
Coloration Two colors once 
Motor power 1.5KW 
Bodyweight  0.5T 
The machine has included one screen.


I. Main building and operating basic principle

The printing machine is the particular device for LPG cylinder entire body printing word, brand name and other sample. combined with frame, urgent plate, push, move and control system. With limited design, reliable functioning, very good print good quality, easier procedure, and high working effectiveness.
The working theory of this equipment is: put the cylinder on the supporting desk, push “CZPTt” button, the feeding technique will transfer the cylinder to appointed print area and fix, the print glue plate will shut instantly, then the print plate will get rid of instantly, after end, the press glue plate will elevate, the print plate again up, the feeding method just take the cylinder out, a single circulate is ending.

II. Assemble and adjustment

  1. Set the tools in level doing work ground, linked with air source then alter gas triple elements, exhaust throttle valve, allow the products doing work as beneath: feeding- press glue plate down push-transfer the printer-elevate the plate, just take again the print plate, get out the cylinder
  2. Adjustment for the press glue plate, place the cylinder to supporting table to print spot, the fuel cylinder pressed, the glue plate entire related with cylinder surface, and keep correctly pressure.
  3. Adjustment for printing place, modify the printing foundation and preserve 5-8mm distance to cylinder floor, and in the middle and in amount.
  4. Adjustment for ink scrap, let the ink blade a little related with silk display screen area.

III. Maintain and Interest

1. Add lubrication oil for motion areas in time, pneumatic FRL need to preserve oil to lubricate the cylinder and drainage on time.
two. Keep cleaning of un-print cylinder surface area, must cleanse cylinder area prior to print, to defend the dusty motivated the print top quality or injury the silk monitor.
3. Properly alter the print ink viscosity in printing, too slim will oil leakage, too thick will ink difficultly, non-uniform coloring.
4. Keep cleaning of print ink, protect the dusty drop to ink or printing, or else will damage the silk display screen.
five. Remove the print plate soon after printing, cleanse the rest ink and thoroughly clean the print plate, press glue plate, scrap blade, and many others. Ought to cleanse by gentle thing in cleansing, can’t use hard substance, to avoid to hurt the silk display. 

Delivery Image

Other LPG Gas Cylinder Generating Equipment

LPG fuel cylinder welding line machines introduction
We source the full welding options for LPG cylinder, such as socket welding device, deal with/collar welding equipment, foundation ring welding machine, longitudinal welding machine single/double circumference welding device et cetera.


Comparision among MIG and Saw welding for LPG gasoline cylinder
2000 pcs cylinders/8 Hours
Description MIG welding Observed welding
Potential 360 pcs/8hrs/established 240 pcs/8hrs/set
No.Of welding machines six eight
No.Of welders 3 39
No.Of welding go One path Two paths
Energy use MIG saves 40% than Observed
Wire consumption MIG saves forty% than Observed
Car laser & video tracing gadget MIG welder has vehicle laser & video tracing unit, Saw welder does not

—— Device Configuration

Contemplate various requirements, we prompt two device configuration Full automobile & Semi auto which could be picked by clients to suit for the price range.

Complete autoamtic welding line function

Total-car welding equipment includes socket welding, manage/collar welding, foundation ring welding, circumference welding, and all machines perform routinely, the cylinder halves are conveyed by mechancial arm and chain, this system really will save significantly labor expense and improve the operating performance seemingly.

Element A:Template complete automatic welding line structure

Component B:Full automated welding line in depth introduction

[Complete vehicle socket welding]

This equipment is utilised for upper cap socket welding and edge welding part sharpening.Equip with Panasonic YD-350GL4 welder 1 set, water cooling welding torch 1 pcs, 8L automatic cycle water cooling tank 1 set.The principal shaft motor is .75KW.Polishing motor is one.5KW, equip with the grating protection protection.

Equip with NO.six CZPT station, 1 set, vane pump, five.5KW.Placing stress:Slipping 4 MPa, increasing 9 MPa.

[Full automobile manage welding]

This machine is utilized for higher cap hadnle welding.Equip with 3 sets welding torch, 3 welders finish at one time.Equip with Panasonic YD-350GL4 welders 3 sets, welding torch 3 pieces.Primary shaft motor is .4KW, with the grating safety defense.

Equip with No.seven hydraulic station, vane pump, five.5KW.Environment pressure:Urgent 4MPa, climbing 9MPa.

[Full auto base ring welding]

This device is utilised for reduce cap bottom base welding, equip with three welding torch, 6 welders could be finished at two times.Equip with Panasonic YD-350GL4 welder 3 sets, welding torch 3 piece.Main shaft motor .4KW, with the grating security protection.

Equip with No.three hydraulic station, vane pump, five.5KW, environment force:Urgent 4MPa, growing 10MPa.

[Complete car single head circumference welding]

This device is utilized for cylinder higher shell and decrease shell welding, it adopts seam eyesight monitoring unit, computerized imaging to monitoring welding seam, welding the circumferential seam instantly, no want of guide intervention.It adopts Panasonic 500GS (particular) substantial-speed pulse MIG welding supply.Welding speed can get to to 1000mm/min.It adopts double inner cooling MIG torch, it is ideal for lengthy time welding.It is outfitted with Supercooler computerized circulating cooling water tank to cooling the welding torch circularly.

Semi car welding machine function

Semi vehicle welding equipment adopt far more operators for loading and unloading cylinder halves goal, while this choice is financial system if the funds is limited.

Component A:Template semi car welding equipment structure

Element B:Semi vehicle welding machine comprehensive introduction


Semi-car take care of&base ring welding machine Semi-vehicle socket welding device
Motor electrical power: .75KW Motor electrical power: .75KW
Air pressure: .4-.eight MPa Air pressure: .four-.8 MPa
Welding torch altering assortment: Welding torch modifying assortment:
X: -100mm X: -100mm
Y: -50mm Y: -50mm
Welding torch angle adjusting range: ±45° Welding torch angle adjusting variety: ±45°
Velocity: 60S/pcs Pace: 60S/pcs
Equipment fat: 600KG Equipment excess weight: 600KG
Machine dimension: 900x500x2150mm Device dimension: 900x500x2150mm

——Right after Sale Support

Timely & Happy oversea set up support

We have abundant experience for oversea set up and commissioning work, we always send the skilled engineers for aiding our consumers to operate the machine effortlessly and speedily.

—— Our Manufacturing unit Site

Our robust machining ability 

Our hired staff are above one hundred for various operating approach, such as milling lathe,  punching equipment, warmth therapy, grinding equipment, lead to we make all equipment areas by ourselves, we can make sure the parts quality by one hundred%.

Moreover, with robust manufacuting capacity, we can shipping and delivery every single get on time.

—— Business Introduction

HangCZPT Longterm CZPT Technologies Co.,Ltd

HangCZPT Longterm CZPT Systems Co.,Ltd is the expert manufacturer of automobile-welding tools (MIG, TIG, Magazine, PAW) and automated welding technique integration, as properly as related products.Because of to hugely automatic, easy procedure, welding toughness and services existence with the very same stainless metal and plate, is widely utilised in aerospace, chemical sector, equipment, pressure vessels, fireplace extinguishers, drinking water heater, enamel h2o tank, stainless metal items and other industries.

In buy to recommend you the suitable machine, we would like to get the beneath from you:

– What is the cylinder dimensions you want to create?
– What’s the daily capability you want to make ?

—— FAQ:

LPG cylinder production tools
Q: What dimension of LPG cylinder your machine can generate?
A: 6kg, 12kg,15kgs and 50kgs LPG cylinder for cooking and other size in accordance customers’ requirement.

Q: Can you design and style equipment in accordance LPG cylinder technical drawing?
A: Certain, make sure you deliver your specialized drawing to us.

Q: What are the advantages to choose your equipment?
A: Our equipment are sturdy and dependable for lengthy expression industrial manufacturing

LPG Gas Cylinder Silk   Screen Printing Machine